Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

smokin' help

Old Mar 6, 2006 | 12:52 AM
  #1  
98ssinar's Avatar
Thread Starter
Teching In
 
Joined: Mar 2006
Posts: 21
Likes: 0
From: arkansas
Default smokin' help

My car is smokin when I let off of it after really getting on it. I think it is the pistons and ring to be replaced if I am right I need some idea's on some good priced but good for more power. I am also throwing aound the idea of going with a LS6 heads and intake or should I just gwt a super charger? This is my !st LS and need some help for more HP. And to fix my smoke problem. Thanks for the help
Reply
Old Mar 6, 2006 | 05:01 AM
  #2  
orangeapeel's Avatar
ЯєŧąяĐ Єl¡m¡иąŧøя ™
iTrader: (18)
 
Joined: Nov 2004
Posts: 16,083
Likes: 4
From: Justin, TX
Default

If you do find out that it is because you have bad rings...(doubt it is the pistons) or a spun bearing. I would price a shortblock for cheaper. you could have a nice 408 forged shortblock for the price of a nice supercharger.

EDIT:
--------------
Look at the sponsor list to the right and you should be able to see it.
TSP, Thunder, Speed Inc., LME, and SDPC to name a few.

Last edited by orangeapeel; Mar 6, 2006 at 05:08 AM.
Reply
Old Mar 6, 2006 | 07:08 PM
  #3  
98ssinar's Avatar
Thread Starter
Teching In
 
Joined: Mar 2006
Posts: 21
Likes: 0
From: arkansas
Default thanks

Originally Posted by orangeapeel
If you do find out that it is because you have bad rings...(doubt it is the pistons) or a spun bearing. I would price a shortblock for cheaper. you could have a nice 408 forged shortblock for the price of a nice supercharger.

EDIT:
--------------
Look at the sponsor list to the right and you should be able to see it.
TSP, Thunder, Speed Inc., LME, and SDPC to name a few.

I want to stay with the LS series that is why I was thinking about putting a super charger or ever LS 6 heads and intake.. So you think it might be just my rings well i will just buy the whole set so I can start off fresh thanks for the imput.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:35 AM.