How To's
Trending Topics
I'd appreciate a header install and cam install right up (seeing as these will be done soon and I have no clue how to do it!). If you don't want to do a right up, maybe send me towards one? Thanks!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
All are great ideas. That being said, I know theres a step by step on how to flycut at FFHP, here: http://www.forcefedhighperformance.com/tech_Isky.htm Also, Keliente has done a great job with the ring and pinion install here: http://www.keliente.com/gears.htm As for the rod bolts, you can find step by steps online on how to drop the k member and oil pan. Once you do that, it should be pretty simple to figure out how to swap the rod bolts one at a time. I for one would like to see a writeup on an lsx engine buildup. It would be a huge undertaking to document every step, but its really the holy grail of performance mods.
Launching!
Joined: Feb 2005
Posts: 271
Likes: 0
Roller rocker install. I cant seem to do the install and adjust the valves correctly. At least I don't think so. I read to hand tightened till the slop in the pushrods are gone. But you can't get your fingers on the rods. I can barely twist them. Is the slop meant up and down movement or twisting motion.
