TTP H/C Qs
03-18-2006, 04:07 PM
#1
Launching!
Thread Starter
Join Date: Feb 2006
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
HEAD/CAM 4 a ZO6??? I have an '02 ZO6 that's stock save for LGM lts, O/R x and Stingers, and the usual air intake mods. I've been checking out H/C combos, and wonder if anybody has any experience with the TTP stg. 3 or 3R pkg? If I went with the 3R, it would be in anticipation of going with a forged 402 in the future. It seems like a very complete, well thought out combination using ported AFR 225s,(205s in the stg3) and with unspecified cam #s. BTW, anybody know the cam specs of this bad boy? Thanks.
Last edited by exSSer; 03-18-2006 at 07:08 PM. Reason: poor thread response
03-20-2006, 10:31 AM
#3
Banned
iTrader: (18)
Join Date: Aug 2003
Location: Wayne, NJ
Posts: 2,984
Likes: 0
Received 0 Likes
on
0 Posts
A lot of customers on this board have our h/c packages and tons with our cam only packages. Might want to try to post this in the Eastern Members section. Just to name a few off hand, 9T9BlueTA, 03YELLZ06, javaradd, Doceww etc.
But, I would post this in the Eastern probably get a better response.
The Stage 3 Equalizer cam is in the 230 duration range. The EQ V3.1 now changed to V.4 is in the 240 duration range. Lifts on both cams are right around .600.
But, I would post this in the Eastern probably get a better response.
The Stage 3 Equalizer cam is in the 230 duration range. The EQ V3.1 now changed to V.4 is in the 240 duration range. Lifts on both cams are right around .600.
