Question for Dart Head owners
Thread Starter
TECH Enthusiast
iTrader: (30)
Joined: Nov 2005
Posts: 690
Likes: 2
From: Springfield, IL
Question for Dart Head owners Are the valve cover rails any taller than stock? I'm curious because I'm thinking seriously of purchasing some Darts for my "02" and I already have a set of Comp magnum 1.75 rollers. If I put them on the motor now, I have to get spacers. If I wait, I'm wondering if I can get by without the spacers on the Darts. Thanks!! Stock covers BTW.
I have the Comp 1.75:1 Pro Magnum Roller Rockers with the stock valve covers and no spacers. I did have to do some clearancing with the die grinder. Take a look at some of the pictures on my web site (see signature). You can see what has to be clearanced.
Steve
Steve
My heads will go on this weekend (weather permitting 
) but I did mock up my Cranes last night and then used some clay to get clearances. It appears that the Cranes will clear on the Darts as they do on the stock heads. I know you are using Comps, but thought this my be useful information if the Comps are supposed to clear on stock heads. Mind you, its not a dance hall under there, but I don't think there will be any contact problems.
) but I did mock up my Cranes last night and then used some clay to get clearances. It appears that the Cranes will clear on the Darts as they do on the stock heads. I know you are using Comps, but thought this my be useful information if the Comps are supposed to clear on stock heads. Mind you, its not a dance hall under there, but I don't think there will be any contact problems. 
