408 with etp 255 heads
That sucked! You would hope for more. Did your peak numbers go up higher in the rpm range? Also, what heads are you running?
Just talked to Brian at LME
Porting 450.00
intake+rails 399.00
elbow 200.00
plus labor ??
Just talked to Brian at LME
Porting 450.00
intake+rails 399.00
elbow 200.00
plus labor ??
Last edited by beardWS6; Apr 12, 2006 at 05:35 PM.
Originally Posted by beardWS6
That sucked! You would hope for more. Did your peak numbers go up higher in the rpm range? Also, what heads are you running?
Just talked to Brian at LME
Porting 450.00
intake+rails 399.00
elbow 200.00
plus labor ??
Just talked to Brian at LME
Porting 450.00
intake+rails 399.00
elbow 200.00
plus labor ??
it picked up 7rwhp on almost the exact same hp curve. lost very little down low. running CHS 5.7L heads.
