Anyone running Lunati
05-01-2006, 10:09 PM
#1
Teching In
Thread Starter
Join Date: Mar 2006
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Anyone running Lunati Anyone running the Lunati for their ls1?
here's the specs 282°/287° adv dur, 218°/221° duration @.050", .526"/.534" lift, 116sep 112 int c/l part#55003lun
seems similar to the comp cam xr275hr 222/224 556/558 (but with larger adv durations)
a couple of dumb questions... what is the large difference in advertised durantion going to mean in terms of power,idle,sound?
I'm looking for somthing that is street only, 68 camaro sound, an increase in torque and horse power across the powerband, not lose any low end power over the stock, and can use on standard 4l60e transmission and can run in the mid 12's ? ( car will have 3.70 rear) thoight i remember reading not to go with cams that had large differences in adv to .50 numbers but can't remember why..ps it's going to be matched up with stock 4l60e trans
any ideas about the Lunati?
here's the specs 282°/287° adv dur, 218°/221° duration @.050", .526"/.534" lift, 116sep 112 int c/l part#55003lun
seems similar to the comp cam xr275hr 222/224 556/558 (but with larger adv durations)
a couple of dumb questions... what is the large difference in advertised durantion going to mean in terms of power,idle,sound?
I'm looking for somthing that is street only, 68 camaro sound, an increase in torque and horse power across the powerband, not lose any low end power over the stock, and can use on standard 4l60e transmission and can run in the mid 12's ? ( car will have 3.70 rear) thoight i remember reading not to go with cams that had large differences in adv to .50 numbers but can't remember why..ps it's going to be matched up with stock 4l60e trans
any ideas about the Lunati?
Last edited by newbe60; 05-02-2006 at 06:53 AM.
05-01-2006, 10:17 PM
#3
11 Second Club
iTrader: (9)
Join Date: Nov 2004
Location: Thornton, CO
Posts: 1,360
Likes: 0
Received 0 Likes
on
0 Posts
I ran a Lunati 226/234 554/575 112 for about a year.
Made decent power even on the stock tune. 376.8 RWHP 370.6 ft/pounds.
Wasn't really a cam designed for N/A use though. Even though it worked.
Made decent power even on the stock tune. 376.8 RWHP 370.6 ft/pounds.
Wasn't really a cam designed for N/A use though. Even though it worked.
