Solid cam help
Thread Starter
TECH Fanatic
Joined: Jun 2002
Posts: 1,124
Likes: 0
From: kuwait
Solid cam help Frankly my friend has an engine LS1 346 solid cam from FMS "Allan" anyway.. the problem is we don't know how to adjust the rocker arms and when?? also how to keep the engine in safe?
So we need your helps guys.
Thank you in advance.
So we need your helps guys.
Thank you in advance.
to set valves do as follows:
When the exh. starts to open, set the intake.
When the int. starts to close, set the exh.
This will ensure the lifter is on the base circle of the cam.
When the exh. starts to open, set the intake.
When the int. starts to close, set the exh.
This will ensure the lifter is on the base circle of the cam.
Thread Starter
TECH Fanatic
Joined: Jun 2002
Posts: 1,124
Likes: 0
From: kuwait
Sorry for the mistake the cubic inch is 427 not 346.
777. Yes they're adjustable it's a Solid cam not hyd cam.
Bryan@LME. Okay i'm understand you and what's the adjustable number to tug the rockers?
777. Yes they're adjustable it's a Solid cam not hyd cam.
Bryan@LME. Okay i'm understand you and what's the adjustable number to tug the rockers?
