2002RamAir

iTrader: (19)

Hello everyone,
I have searched and searched till I can't search anymore!! I have all the supporting bolt on's and want some heads..who doesn't..I am a m6 car and I am wanting to run the ms3 cam. What heads would net me the best results for the money? This will probably be the last mod to the car for at least 4 or 5 years so I want to make it worth it.
Thanks

cyphur

iTrader: (10)

I would take to TSP and other folks who have done heads/cam with the MS3. They will all be the most helpful.

SVT THIS

iTrader: (27)

I would give TSP a call like cyphur_traq said. They just released a new cam on LSK lobes (similar in size to the MS3 with more lift) that is supposed to work great with the CNC LS6 heads. If you are wanting to spend some money and get lots of torque, you could look into some AFR 225s and Patrick Gs "Torque Cam". He is making awesome numbers. However, the TSP route would save you about a grand or so.

grinner

+1
I hope it turns out good, man.

eamador11

AFR 205s, hands down! Do it once, and never look back!

02ZOh6

I would look into the TSP heads also if money was a concern.