map sensor readings
Thread Starter
Closed ex-Sponsor Account
iTrader: (7)
Joined: Dec 2002
Posts: 945
Likes: 1
From: Pittsburgh, PA
map sensor readings threw a code today for the map sensor. so i wiggled it then took it for a ride with the Tech 2 hooked up. it seem to read but im not sure what they should read. at idle its about 2.18v truck blowing rich cloud for now. coded popped up after cruising up a steep hill in OD at like 25mph well trans was getting hot [3800 stall 4500lb truck]
just need to know where it should be reading, a few said i could have a vaccum leak causing this. might be the vaccum line going to the trans or the NOS soleniod. besides that 02s reading good, timing seems good, TPS seems good ICT seems good.
\
\
\
--------------Quik
just need to know where it should be reading, a few said i could have a vaccum leak causing this. might be the vaccum line going to the trans or the NOS soleniod. besides that 02s reading good, timing seems good, TPS seems good ICT seems good.
\
\
\
--------------Quik
