cam install
Staging Lane
Joined: Aug 2005
Posts: 94
Likes: 0
check out this install guide:
http://www.ls1howto.com/index.php?article=23
It will probably run without reprogramming the PCM, but to run well, you WILL need a tune. You won't take advantage of the gains from the cam without it.
My car was especially sluggish at low RPM without tuning. (224/224 .581/.581 112 LCA cam)
http://www.ls1howto.com/index.php?article=23
It will probably run without reprogramming the PCM, but to run well, you WILL need a tune. You won't take advantage of the gains from the cam without it.
My car was especially sluggish at low RPM without tuning. (224/224 .581/.581 112 LCA cam)
On The Tree
Joined: May 2006
Posts: 137
Likes: 0
From: 60 mi SE of Melbourne, Australia
Yep, that's the guide I used.
I put in a Comp 222/224@112lsa and it DEFINITELY needed to be re-tuned to suit.
It would idle rough/stall and play up before tune.....
After tune.....
Cheers,
Macca
I put in a Comp 222/224@112lsa and it DEFINITELY needed to be re-tuned to suit.
It would idle rough/stall and play up before tune.....
After tune.....
Cheers,
Macca
