Yes, i searched!
Thread Starter
Launching!
Joined: Dec 2004
Posts: 288
Likes: 0
From: California
Yes, i searched! I searched all over this forum to see if anyone had my combo, but i didnt find a match 
So i had to make a post.. 
Here it is:
I have LS6 style stage II heads with 2.02"/1.57"/64cc
Tommorow i want to order the G5X2 232/240 .595 .608 LSA 114
Now what im afraid of is, my valves NOT clearing...would i have to do any shimming or fly cutting...? Does anybody have any experience with this combo?
Let me know, thanks guys.
So i had to make a post.. Here it is:
I have LS6 style stage II heads with 2.02"/1.57"/64cc
Tommorow i want to order the G5X2 232/240 .595 .608 LSA 114
Now what im afraid of is, my valves NOT clearing...would i have to do any shimming or fly cutting...? Does anybody have any experience with this combo?
Let me know, thanks guys.
I have that setup!
Just kidding....
Anyway. What you should do is check for yourself. People are not going to be able to tell you if it is going to clear as far as PTV goes. No one on the phone or internet can answer a measurement on a setup that is not directly in front of them being properly checked. You are going to have to install the cam and use the clay method when you pull the heads to see if it is actually going to work.
Just kidding....
Anyway. What you should do is check for yourself. People are not going to be able to tell you if it is going to clear as far as PTV goes. No one on the phone or internet can answer a measurement on a setup that is not directly in front of them being properly checked. You are going to have to install the cam and use the clay method when you pull the heads to see if it is actually going to work.
Thread Starter
Launching!
Joined: Dec 2004
Posts: 288
Likes: 0
From: California
Originally Posted by orangeapeel
I have that setup!
Just kidding....
Anyway. What you should do is check for yourself. People are not going to be able to tell you if it is going to clear as far as PTV goes. No one on the phone or internet can answer a measurement on a setup that is not directly in front of them being properly checked. You are going to have to install the cam and use the clay method when you pull the heads to see if it is actually going to work.
Just kidding....
Anyway. What you should do is check for yourself. People are not going to be able to tell you if it is going to clear as far as PTV goes. No one on the phone or internet can answer a measurement on a setup that is not directly in front of them being properly checked. You are going to have to install the cam and use the clay method when you pull the heads to see if it is actually going to work.
like little kid clay? or is it gonna be something i buy at a parts store?
How much of a clearence do i need to say im all good? Or to keep it safe...
TECH Senior Member
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
No, you need natural organic clay. Playdough is elastic and will screw the reading up.
On the street .080 int and .100 exhaust is fairly safe
some people run tighter though, but I never
ed my pistons
On the street .080 int and .100 exhaust is fairly safe
some people run tighter though, but I never
ed my pistons 
Thread Starter
Launching!
Joined: Dec 2004
Posts: 288
Likes: 0
From: California
Originally Posted by redtail2426
also depends if they have been milled and what gasket your going to use.
