DCR help
DCR help Ok, i know there is a sticky for this, but i guess im just not smart enough to figure it all out.. 
Can someone PLEASE help me SPEC a cam that puts me in the optimal DCR range.
cylindar head = 67cc
piston = 2cc VR
head geasget thicknes = .004
cylinder bore = 4.031
deck clearance = -.002
stroke = 4"
rod length 6.125
Just really need some cam specs to play with.. everything that i thought would put me in my range is only like a 6.75 DCR..
I know someone here is smarter than me at this, i need to tell the builder tomorrow what cam to slap in it, so any help would be awsome!!
chris
Can someone PLEASE help me SPEC a cam that puts me in the optimal DCR range.
cylindar head = 67cc
piston = 2cc VR
head geasget thicknes = .004
cylinder bore = 4.031
deck clearance = -.002
stroke = 4"
rod length 6.125
Just really need some cam specs to play with.. everything that i thought would put me in my range is only like a 6.75 DCR..
I know someone here is smarter than me at this, i need to tell the builder tomorrow what cam to slap in it, so any help would be awsome!!
chris
Last edited by chrismcdaniel; Jul 25, 2006 at 01:03 PM.
