112 and 114LSA
112 and 114LSA if both cam are the same (g5x3), but one is on a 112 and one is on a 114, which is going to make more power? which is going to be faster in the 1/4 assuming equal setups and eveything being equal?
TECH Senior Member
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
It would be safer to flycut. The heads would have to be stock valved with stock gaskets. It will fit but PTV will be tight.
By flycutting you're removing the imminent danger, you can then run thinner gaskets for better quench and SCR/DCR and you can also run bigger valves for more flow.
By flycutting you're removing the imminent danger, you can then run thinner gaskets for better quench and SCR/DCR and you can also run bigger valves for more flow.
