Torquer 2 Cam Help....
Thread Starter
TECH Enthusiast
iTrader: (10)
Joined: Jan 2006
Posts: 527
Likes: 0
From: Long Island, NY
Originally Posted by Bill Bowling
That is almost exactly what I bought except the cam was a Torquer 1 over a year ago. My car is a DD and I love the cam. It made 401 HP last month.
Good luck.
Bill
Good luck.
Bill
that just boosted my confidence 50%, the other 50 is due to blacknredss putting up with my annoying questions and whining. Thanks a bunch guys!! anyone else with this cam or similar setup??
12 Second Club
Joined: Jun 2005
Posts: 1,275
Likes: 0
From: Kansas City, MO
Originally Posted by Marc '99T/A
How long would you recommend going between spring changes with a setup like this?
12 Second Club
Joined: Jun 2005
Posts: 1,275
Likes: 0
From: Kansas City, MO
Originally Posted by fastest94v6
O i almost forgot, should i go with the COMPLETE set of the ls2 or just the chain? 75k miles on the car.
Teching In
Joined: Jul 2005
Posts: 19
Likes: 0
I would like to keep tabs with you on how all this works out and such. Please be sure to let me know your progress and how you like the package when you get it all installed and tuned. I am thinking about getting the same stuff you are and wouldn't mind for you to be the test rat 
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by fastest94v6
thanks bro. what kind of exhaust are you running?
i run 918s and seen 7500 rpms with no issues
Thread Starter
TECH Enthusiast
iTrader: (10)
Joined: Jan 2006
Posts: 527
Likes: 0
From: Long Island, NY
Originally Posted by snowbird88gta
I would like to keep tabs with you on how all this works out and such. Please be sure to let me know your progress and how you like the package when you get it all installed and tuned. I am thinking about getting the same stuff you are and wouldn't mind for you to be the test rat
hahah not a problem...it might be a few weeks though.
12 Second Club
Joined: Jun 2005
Posts: 1,275
Likes: 0
From: Kansas City, MO
Originally Posted by Quik
thats mac 1 3/4 mid lenghts for fbodys into a custom ORY pipe and a super 40 flowmaster
i run 918s and seen 7500 rpms with no issues
i run 918s and seen 7500 rpms with no issues
i wish i could rev that high 
This is great. 
I bought that exact package on a 112 from Zach last Thursday.
Torquer V.2
PRC Spring Kit
Ported LS6 pump
LS2 Timing chain (the kit)
TSP Hardened Pushrods
I plan on starting the install the last weekend in July. We should stay in touch and compare notes.
According to Zach this will run just fine on the street and the PRC springs are more than sufficient for this cam. I was just a nervious as you were, this being my first cam install.
I still need to buy a spring compressor. I am thinking about the Tims Tool.
R/
Frat
I bought that exact package on a 112 from Zach last Thursday.
Torquer V.2
PRC Spring Kit
Ported LS6 pump
LS2 Timing chain (the kit)
TSP Hardened Pushrods
I plan on starting the install the last weekend in July. We should stay in touch and compare notes.
According to Zach this will run just fine on the street and the PRC springs are more than sufficient for this cam. I was just a nervious as you were, this being my first cam install.
I still need to buy a spring compressor. I am thinking about the Tims Tool.
R/
Frat
Thread Starter
TECH Enthusiast
iTrader: (10)
Joined: Jan 2006
Posts: 527
Likes: 0
From: Long Island, NY
Originally Posted by Fratsit
This is great.
I bought that exact package on a 112 from Zach last Thursday.
Torquer V.2
PRC Spring Kit
Ported LS6 pump
LS2 Timing chain (the kit)
TSP Hardened Pushrods
I plan on starting the install the last weekend in July. We should stay in touch and compare notes.
According to Zach this will run just fine on the street and the PRC springs are more than sufficient for this cam. I was just a nervious as you were, this being my first cam install.
I still need to buy a spring compressor. I am thinking about the Tims Tool.
R/
Frat
I bought that exact package on a 112 from Zach last Thursday.
Torquer V.2
PRC Spring Kit
Ported LS6 pump
LS2 Timing chain (the kit)
TSP Hardened Pushrods
I plan on starting the install the last weekend in July. We should stay in touch and compare notes.
According to Zach this will run just fine on the street and the PRC springs are more than sufficient for this cam. I was just a nervious as you were, this being my first cam install.
I still need to buy a spring compressor. I am thinking about the Tims Tool.
R/
Frat
