cam only low 11's
 

whitch cam could get down the track with a et around a 11.2

well my cam is running in the high 11's and with some juice it would be low 11's.

I was running 11.87 with a 2.0 60' 3680 raceweight with a CARTEK 2x (224/228) cam only. Some slicks and skinnies and weight reduction will get you close if you are a good driver.

Hi-stall, 4400+ and 240+ cam. Trex should work nicely. If M6, 6000rpm clutch dumps. Thing is, you need to set your car up to handle what it will need to make 11.2s a reality. That will cost way more than just a cam. Its not hard to make the power to achieve low 11s. It is hard to balance the car so it is capable of doing all it needs to achieve that.

quoted for truth... :)

fixed :jest:

I've gone mid 11's w/a hell of alot less than a 4K+ converter & 240+ cam.

ur gonna need 12 bolt + slicks most likely for an m6 to put down those numbers cam only

I have run a 11.5 @ 118.0-mph with a 1.55-60' in a car with just lid cat-back and a 125 dry shot with dyno tune, and slicks spraying out of the hole. But it was an A4 car. So you dont need a lot to run 11s.

i wanted to spray a 100 shot to get their but after hearing the bottel only last about 5 passes i was starting to think about a cam.


err i dunno, what about a 11.5?

I was running consistent 11.3's with mods in sig with a LS6 motor. they should drop alot with my LS2402 currently being built. Oh & my car is about 3650lb!

size of your cam?

The 98 heads will limit the HP gain on a Cam.

What do you run now?

Jason99ta went 11-teens with the TR230/224 cam. It's certainly a player in the field.

Ben T.

my friend's 98 m6 Z28 went 11.3 with bolt on's and 100 hp wet shot.