Valvetrain geometry ?
They were/are noisy, originally had 7.350s. Measured, showed that I needed 7.325 plus preload. So I bought 7.400s since that would give me .075 pre load. The 7.400s are still noisy.
TECH Senior Member
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
Originally Posted by jub jub
Think yours is loud? You should here mine! clack...clack...clack...tick...tick....tic.. 
Once it reaches 3 grand on the tach it's all good!
Once it reaches 3 grand on the tach it's all good!
