Cam Setup
Cam Setup I have bolt-ons right now an am spraying a 150 shot...
I picked up some heads recently here are the specs on them..
New GM LS2/LS6 243 casting
5 axis CNC machined
Fully assembled
220cc Intake Runner
2.020 Intake Valves
1.550 Exhaust Valves
Manley 221426 dual coil valve springs
Flow over 300 cfm on std 3.900 bore
would they work well with specs of this cam..
232 @ .050
0.595 Lift
114 LSA
Would that work well with the nitrous ina daily driver or could I get away with bigger? My cars an automatic with a 3.73 gear and spray so I know that all effects it. The next cam up would be..
236@.050
0.602 lift
113 LSA
Would that be too big for a Daily Driver? I drive ALOT...usually 30-50 miles.
thanks
I picked up some heads recently here are the specs on them..
New GM LS2/LS6 243 casting
5 axis CNC machined
Fully assembled
220cc Intake Runner
2.020 Intake Valves
1.550 Exhaust Valves
Manley 221426 dual coil valve springs
Flow over 300 cfm on std 3.900 bore
would they work well with specs of this cam..
232 @ .050
0.595 Lift
114 LSA
Would that work well with the nitrous ina daily driver or could I get away with bigger? My cars an automatic with a 3.73 gear and spray so I know that all effects it. The next cam up would be..
236@.050
0.602 lift
113 LSA
Would that be too big for a Daily Driver? I drive ALOT...usually 30-50 miles.
thanks
