Help With Static Cr With New Heads
Thread Starter
TECH Fanatic
iTrader: (42)
Joined: Sep 2005
Posts: 1,430
Likes: 2
From: North Fort Worth
Help With Static Cr With New Heads Ok Stock Ls1 With Ls6 Heads Milled .018" And I Will Be Using A Stock 99-02 Ls1 Head Gasket That Is .055" I Think. What Will My Static Cr Be? Thanks In Advance
ur gonna need ALOT more info. when i calculated mine there was about 10-15 fields to full out.
mine came out to be exactly 11.0xxx.:1
deck height, head cc, piston dish/dome cc, obviously bore/stroke, gasket thickness and bore, cant remember what else..
mine came out to be exactly 11.0xxx.:1
deck height, head cc, piston dish/dome cc, obviously bore/stroke, gasket thickness and bore, cant remember what else..
