Cam question....

Reply Subscribe

Thread Tools

Search this Thread

Aug 17, 2006 | 07:55 PM

JAG

Thread Starter

Teching In

iTrader: (8)

Joined: Jul 2004

Posts: 49

Likes: 0

From: Chandler, Az

Cam question....

Hey guys, I don't know much about cams, but was wondering if a TSP 231/237 duration, .598/.595 lift, 112-degree LSA cam be used with stock heads? Why or why not? Any help appreciated...

Aug 17, 2006 | 08:02 PM

Beasst8

TECH Fanatic

iTrader: (1)

Joined: Nov 2005

Posts: 1,142

Likes: 0

From: Goldsboro, NC

I would just call TSP and ask. They are all really cool guys. Its the best way to be TOTALLY SURE.

Aug 17, 2006 | 09:10 PM

orangeapeel

ЯєŧąяĐ Єl¡m¡иąŧøя ™

iTrader: (18)

Joined: Nov 2004

Posts: 16,083

Likes: 4

From: Justin, TX

I would start with the Cam Guide sticky. Then start talking to a sponsor.

Aug 17, 2006 | 09:43 PM

HeapaShifter

TECH Resident

iTrader: (2)

Joined: Jan 2006

Posts: 845

Likes: 0

From: Myrtle Beach, SC

I'm pretty sure there will be no piston-to-valve clearance issues. Always check for yourself anyways before starting the engine.

Aug 18, 2006 | 02:43 PM

98Grnz28

11 Second Club

iTrader: (7)

Joined: Dec 2004

Posts: 184

Likes: 0

From: Hartselle, Al

You will have no problems running that cam with a stock motor. That is the same cam I have and I been running my for over an year. With nitrous too!

Sep 4, 2006 | 04:45 PM

Violatorno1

12 Second Club

iTrader: (3)

Joined: May 2004

Posts: 189

Likes: 0

From: Altoona, PA

I run this cam with 5.3 heads and 2.02 valves with no problem. Idles nice with EFILive bonus.

http://smg.photobucket.com/albums/v6...231237idle.flv

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last