i cant wait to get mine installed! keep us updated on the status!

congrats on the cam!

 

yeah so far its doable,

 

you don't have to do anything special for this cam. No flycutting, stock heads, so far so good.

 

my car is an a4...do you think ill have major problems driving around? for like a week without a tune? also wat lsa would you guys recomend for an a4?

 

A 112 LSA is doable, but it may be tough to get it to idle in an A4.

I'd go with a 114LSA, but just remember that with a cam that large on a 114 you'll probably have to spin it high to see it's peak power.

Stock bearings/rod bolts with mileage don't like that too much.

Not the best cam for someone not looking for a full drag max effort setup.

 

My car is an A4. Now I have a tune in my car from a much much milder cam, and before I put the headers on, and my car idles perfect. I don't know how it would do on a stock tune, but i think it would be doable. And btw, mine is on a 111 lsa.

 

What's your exhaust setup? That has to sound pretty mean.

 

It sounds so bad ***, it really does... but as far as my exhaust goes, it's a custom one I had done... headers straight to dynomax mufflers with just a bend coming out to the side of the car. There's not much of an exhaust there, but it's surprising how deep it sounds. I keep promising to get video of it, and haven't done it. Today I will make it my goal to atleast get the idle of it... I'm super excited to finish the tune on it so I can see what it's going to run.

 

Can't wait to hear it!

I'm thinking about getting this cam in the next few months

 

thanks! well if your running on a 111 lsa with an a4 aswell wit no problems.. than dam! i am to! i wasnt sure wat lsa to get this cam at... as soon as i get her in ill try to get a nice vid for ya guys! theres a long stretch in front of my house to!

p/s monicaz28! beautiful camaro! its like my cars twin only with a cowl hood! dam i dunno if i should sell my hood and get a cowl.. i like the look of both alot! sorry for the