Stroker Kit Questions

Reply Subscribe

Thread Tools

Search this Thread

Sep 11, 2006 | 09:13 PM

Madmax054

Thread Starter

Teching In

Joined: Jan 2006

Posts: 49

Likes: 0

Stroker Kit Questions

I found a 408 Stroker kit and i was wondering if it would be able to run it on pump gas. Also what would i have to change besides the rear end to support the power and everything?

Sep 11, 2006 | 11:30 PM

ChaseSS

TECH Fanatic

iTrader: (17)

Joined: Jun 2004

Posts: 1,373

Likes: 0

From: St. Louis

yes you would, cubes don't really matter about the kind of gas you use... the factor on the type of gas you use if the compression ratio

Sep 12, 2006 | 12:23 PM

lilbuddy1587

TECH Fanatic

iTrader: (1)

Joined: May 2004

Posts: 1,691

Likes: 0

From: Mesa, Arizona

Quote:

Originally Posted by Madmax054

I found a 408 Stroker kit and i was wondering if it would be able to run it on pump gas. Also what would i have to change besides the rear end to support the power and everything?

Swap the tranny for a th350,400 or 200r4(overdrive) if you dont want to spend 4k for a built tranny and dont feel like replacing that 3-4k dollar tranny every other year. Rear end will be just fine because autos are a lot softer on things until you throw a transbreak into the mix. You'd want a 90/90 to "support" the air flow into the motor as well as a good set of heads. Heads are where its at, the rest of the motor is just a pump.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last