Looking for Specifics for rotating assembly upgrade
09-16-2006, 12:36 PM
#1
Staging Lane
Thread Starter
Join Date: May 2005
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Looking for Specifics for rotating assembly upgrade I'm getting ready to upgrade the internals on the engine. I'm choosing to remain at a stock displacement and the car has a STS kit with a FMIC and Meth/H2O. I want to drop the compression too. My goal is 650 RWHP. I currently have 42# injectors and will be going to 60#'s. What specific parts would be up to task. What brand? What model? Anything that I should get to help reach my goal safely?
09-16-2006, 05:21 PM
#2
Really All you would need to do is upgrade pistons and rods. The stock crank will handle that much power no problem. I would look into some Dished JE pistons and a nice set of rods. Just get all new bearings and have the rotating assembly balanced.
09-16-2006, 05:40 PM
#3
10 Second Club
iTrader: (27)
Join Date: Nov 2004
Location: Central NJ
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
Yep, all you need for the shortblock are some good H beam rods, JE or diamond pistons w/rings, bearings and some ARP main studs and you'll have a very stout bottom end.