Just had a tr 224/224 .563/.563 112 LSA installed and im wondering, i have an auto and my mods are in sig, but im having trouble with the shift points and rev limit, just wondering what are the best shift points and rev limit set to have on my set up for the best peformance, thanks.

 

i would say shift @ 6400-6500 and set the limiter to 6700. usually people shift around 300-400 past peak power.

 

my shift light is set at 6200 i believe (maybe 6300), so im guessing i shift closer to 6500. im probably going to set it down a little lower though.

youre might be a little different though since youre an auto

oh, i also have a MTI C2 cam...which is the same except its .581/.581 instead of .563

 

You really feel comfortable shifting at 6500? I'm assuming your car could handle it, or you'd be at the shop. Just seems a little high....maybe I don't have the ***** to take it that high. Of course, my Z has never been healthy. It may be a different story when I get it back tomorrow or Tuesday.

 

i dont always take it that high. the shift light is at 6200 or 6300, and im not the fastest shifter around, so i probably shift close to 6500 sometimes. never had a problem yet of course the springs, retainers, pushrods, etc. are all upgraded too

 

I concur.shift @ those.my 35th is set at those rpms.

 

This is exactly what I do with my 114lsa tr224.