Rod Bolt Upgrade
Thread Starter
11 Second Club
iTrader: (27)
Joined: May 2002
Posts: 2,397
Likes: 0
From: East Palestine, OH - USA
Rod Bolt Upgrade I know about the Katech bolts and Lingenfelter sells a set also. Both of these are supposed to be a direct replacement but what about the ARP ones?
Can they be installed in the same manner that the Katech or Lingenfelter bolts are?
Can they be installed in the same manner that the Katech or Lingenfelter bolts are?
Despite what you're about to hear from a LOT of guys, many many MANY people do the ARP bolts just like the other brands and I've never heard of an issue. If someone has, I'd love to hear it since we just put the ARP2000 bolts in my motor.
I put ARP's in my motor w/o resizing the rods and it went well. I already had my motor out and on a stand so I just flipped it over and did them. Make sure you use the thread lube they supply for torqueing the bolts.
I used the ARP bolts as well and no problems here. Read this link....
https://ls1tech.com/forums/showthrea...=423651&page=2
https://ls1tech.com/forums/showthrea...=423651&page=2
