COMP 918 Spring lift question

Reply Subscribe

Thread Tools

Search this Thread

Nov 8, 2006 | 04:07 PM

jdo6696

Thread Starter

On The Tree

iTrader: (4)

Joined: Aug 2005

Posts: 150

Likes: 0

From: Lenexa, Kansas

COMP 918 Spring lift question

I know they are rated to .600 lift, my question is are they safe to run on a 224 cam with .610/.601 lift? I have the cam to install this winter and am debating if I need to upgrade to some dual springs before I do.

Thanks.

Nov 8, 2006 | 05:42 PM

FIVE-O

On The Tree

Joined: Aug 2005

Posts: 142

Likes: 0

From: Speedway, Indiana

I wouldnt risk it to save a few bucks. Definately get duals.

Nov 8, 2006 | 08:47 PM

jdo6696

Thread Starter

On The Tree

iTrader: (4)

Joined: Aug 2005

Posts: 150

Likes: 0

From: Lenexa, Kansas

Quote:

Originally Posted by FIVE-O

I wouldnt risk it to save a few bucks. Definately get duals.

kinda what I was thinking. what's weird is these are the ones that came from COMP in the package.

Nov 8, 2006 | 08:49 PM

shouldaboughttheZ

TECH Addict

iTrader: (8)

Joined: Nov 2004

Posts: 2,036

Likes: 0

From: H-Town

I run those springs on my TR230/224 cam. I have no problems.

Nov 9, 2006 | 10:55 AM

jdo6696

Thread Starter

On The Tree

iTrader: (4)

Joined: Aug 2005

Posts: 150

Likes: 0

From: Lenexa, Kansas

Quote:

Originally Posted by shouldaboughttheZ

I run those springs on my TR230/224 cam. I have no problems.

I imagine they are fine with .575/.563, unless yours differs from that. I am just asking if using them on a cam with greater than their rated lift specs (.610/.601) is an issue.

Reply Subscribe