A new member, but an old hat... 2 items.
Thread Starter
11 Second Club
iTrader: (3)
Joined: Nov 2001
Posts: 122
Likes: 0
From: Dallas, Texas USA
A new member, but an old hat... 2 items. Hey all... I know many of you from TorqueCentral, and some from LS1.com. Great board you have here...
1. I need to clean the sensors on my MAF and the IAT. What can I use for this?
2. Since I found out about THIS board from a plug on MY board... I figured TURNABOUT was fair play! <img src="images/icons/smile.gif" border="0"> Come visit TORQUECENTRAL.COM. Though we aren't strictly technical, we do have a GREAT board, with some very good tech info, a good group, and even a little fun... <img src="images/icons/smile.gif" border="0">
[ November 15, 2001: Message edited by: yyz28 ]</p>
1. I need to clean the sensors on my MAF and the IAT. What can I use for this?
2. Since I found out about THIS board from a plug on MY board... I figured TURNABOUT was fair play! <img src="images/icons/smile.gif" border="0"> Come visit TORQUECENTRAL.COM. Though we aren't strictly technical, we do have a GREAT board, with some very good tech info, a good group, and even a little fun... <img src="images/icons/smile.gif" border="0">
[ November 15, 2001: Message edited by: yyz28 ]</p>
Staging Lane
Joined: Nov 2001
Posts: 89
Likes: 0
From: Athens, GA
Re: A new member, but an old hat... 2 items. Hey Scott, welcome to the new board. I am an old time member of LS1.com as well.
Unfortunately I don't know the answer to your first question because I have never had to clean the sensors in my MAF, but I would like to thank y'all over at TqCentral for your excellent write-up on a LS1 cam install.
I'll go over and register for the message forums right now.
Chris G
Unfortunately I don't know the answer to your first question because I have never had to clean the sensors in my MAF, but I would like to thank y'all over at TqCentral for your excellent write-up on a LS1 cam install.
I'll go over and register for the message forums right now.
Chris G
Thread Starter
11 Second Club
iTrader: (3)
Joined: Nov 2001
Posts: 122
Likes: 0
From: Dallas, Texas USA
Re: A new member, but an old hat... 2 items. [quote]Originally posted by Chris G:
<strong>...but I would like to thank y'all over at TqCentral for your excellent write-up on a LS1 cam install.
I'll go over and register for the message forums right now.
Chris G</strong><hr></blockquote>
No problem... we tend to keep some odd installs on file... we have a few new writeups in the works, and I'll let everyone know when I get them up!!! <img src="images/icons/smile.gif" border="0">
Welcome to TC! <img src="images/icons/grin.gif" border="0">
<strong>...but I would like to thank y'all over at TqCentral for your excellent write-up on a LS1 cam install.
I'll go over and register for the message forums right now.
Chris G</strong><hr></blockquote>
No problem... we tend to keep some odd installs on file... we have a few new writeups in the works, and I'll let everyone know when I get them up!!! <img src="images/icons/smile.gif" border="0">
Welcome to TC! <img src="images/icons/grin.gif" border="0">
Re: A new member, but an old hat... 2 items. If you locate a place that sells computer internals, they usually sell aerosol cans of electrical parts cleaner. This stuff is made specifically for cleaning delicate electricals, and it evaporates pretty quickly.
Works great on MAF sensors.
As for Torque Central, i'm already a member there <img src="images/icons/smile.gif" border="0">
Tony
Works great on MAF sensors.
As for Torque Central, i'm already a member there <img src="images/icons/smile.gif" border="0">
Tony
