Need Help on installing my Shift Light
Thread Starter
TECH Apprentice
Joined: Nov 2001
Posts: 363
Likes: 0
From: Bolingbrook, IL
Need Help on installing my Shift Light Went to install my shift light today on my 2000 T/A Ws6 and was a bit confused. I need to know where to hook the shift light up to(all the wires) <img src="images/icons/confused.gif" border="0"> , and what is the best way to get the wires to the engine compartment? Thanks...Michael
TECH Fanatic
Joined: Nov 2001
Posts: 1,705
Likes: 0
From: Iowa :-/~
Re: Need Help on installing my Shift Light You can go through the firewall under the dashboard in front of the passengers seat. Look under the hood of the car on the passenger side between the fender and the firewall you will see a rubber grommet you can fish a coat hanger through here and pull wires into the engine compartment. Be sure that you go through the grommet so the wires will not rub against the bare metal. As for the tac if you are talking an LS1 then look at the same spot under the hood for the PCM it is about 6 to 8 inches long by about 4 inches wide. On there you see a lot of wires you have to find the white one I think it is the number 10 and this is the wire you want to get the RPM reading from as for the rest of the wire it really depends on the shift light. Who makes it?
Re: Need Help on installing my Shift Light Check out www.installuniversity.com Install Doc's, then Matt Harlan Shift Light Install. It will show you in pictures what wire you need.
ERic
<img src="images/icons/grin.gif" border="0">
ERic
<img src="images/icons/grin.gif" border="0">
Thread Starter
TECH Apprentice
Joined: Nov 2001
Posts: 363
Likes: 0
From: Bolingbrook, IL
Re: Need Help on installing my Shift Light you guys are the best...thanks...and it is an MSD shift light....Thanks again fellas really appreciate your help a lot!! <img src="images/icons/grin.gif" border="0"> <img src="images/icons/grin.gif" border="0">
