Go to MS3
11-25-2006, 04:18 AM
#1
TECH Apprentice
Thread Starter
Join Date: Oct 2005
Location: Kuwait
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Going to MS3 i'm driving 02 camaro SLP on a Lunati lift 595/595, i think the duration is 29X something i don't remember. any way, i'm willing to change my cam to an TSP-MS3 will it effect the engine ??
Last edited by ELMiN8oR; 11-25-2006 at 04:40 AM.
11-25-2006, 11:02 AM
#3
TECH Addict
iTrader: (5)
Join Date: Jan 2004
Location: Miami, Fl. - Hurricane Highway
Posts: 2,458
Likes: 0
Received 0 Likes
on
0 Posts
Well the MS3 has a duration of 237/242 and a lift of 603/609. I say you call TSP and tell them what your planning to see what they might say from changing cams . Because its not like your changing from an LS6 cam to an MS3, your going from a pretty good cam to something a bit bigger. And maybe you wont like the way your car makes power, or where it makes the power compared to what you have now.
-Joel
-Joel
11-25-2006, 04:12 PM
#4
TECH Apprentice
Thread Starter
Join Date: Oct 2005
Location: Kuwait
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
so eventually i will have a blown engine !
ok how about going into spraying
do i start with 150 wet or do you recomend 100 for a good start. BTW i've tested the car on dyno and it gave me 413 rwhp full bolt ons and a lunati cam. dyno graph will be out next week with some vids 
ok how about going into spraying
do i start with 150 wet or do you recomend 100 for a good start. BTW i've tested the car on dyno and it gave me 413 rwhp full bolt ons and a lunati cam. dyno graph will be out next week with some vids
11-25-2006, 05:27 PM
#5
TECH Addict
iTrader: (5)
Join Date: Jan 2004
Location: Miami, Fl. - Hurricane Highway
Posts: 2,458
Likes: 0
Received 0 Likes
on
0 Posts
Well with my TNT F2 kit i will start off at 100 to make sure that everything works correctly. Then when i see its all good swap out the jets for the 150.
-Joel
-Joel
