Cam Question
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: May 2005
Location: South San Francisco
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Cam Question
Im about to buy a 224/224 112lsa cam and i want to know if i should install anything else while im working on it? I know i searched but couldnt find much.. Can i just throw in the cam and be done or should i purchase anything else. Cause im gonna buy the cam off a buddy..
#4
ЯєŧąяĐ Єl¡m¡иąŧøя ™
iTrader: (18)
Depending on higher milage motors it is a good idea to inspect, or replace the oil pump. I think if you have around 60k though, you should be fine. I would also suggest that you do the timing chain as well. The LS2 chain is peanuts over a full double roller setup. I would definitely do the chain, but if you plan on doing that then You will be able to get to your oil pump with ease.
Hardened pushrods are almost a must. Mechanical over rev will give your stock ones a pretzel shape if they give out!
Hardened pushrods are almost a must. Mechanical over rev will give your stock ones a pretzel shape if they give out!
#6
On The Tree
Thread Starter
iTrader: (1)
Join Date: May 2005
Location: South San Francisco
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Well I have a 02 so the ls6 intake is there and planning on getting a ported TB. My car only has 31k miles. So valve springs, pushrods will do.. How about timing chain? I currently have LT's