I need to replace both belts for a ASP pulley?
Thread Starter
TECH Junkie
iTrader: (3)
Joined: Nov 2001
Posts: 3,078
Likes: 1
From: Republic of Texas
I need to replace both belts for a ASP pulley? When I ordered my pulley the person I talked to said I would need to buy 1 new belt. It's the wider of the two. I got underneath the car to start taking the factory pulley out and just by comparing the pulleys it seemed obvious that neither factory belt would fit the ASP. I do need to replace both, right? The instructions were kinda vague. BTW, I am not putting on a ASP altenator pulley, just the crank.
Re: I need to replace both belts for a ASP pulley? You will need to replace both. The alternator belt is a Gates part number (or equivalent) K060760. AC is K040378.
Most underdrive pulleys require only one belt change. This is probably what the person was thinking.
Most underdrive pulleys require only one belt change. This is probably what the person was thinking.
Thread Starter
TECH Junkie
iTrader: (3)
Joined: Nov 2001
Posts: 3,078
Likes: 1
From: Republic of Texas
Re: I need to replace both belts for a ASP pulley? Okay, I'm kinda stumped. I need a 4 rib belt and a 6 rib belt. I already have the 6 rib belt. It is a NAPA/Gates part # 060760. So, the 4 rib belt that I still need is K040378, right? That is a Gates/NAPA brand? The way you stated it, and the way the instructions read caused me to think that the AC K040378 was the same 6 rib belt, just a different brand (AC). Want to make sure, thanks!
