I can not get the crank pulley on all the way, My belts are not lined up. The bolt is in and tight, Is there any tool that pushes the stock crank pulley on all the way?
Thanks


<img src="graemlins/formula.gif" border="0" alt="[Pontiac]" /> <img src="graemlins/camaro.gif" border="0" alt="[Chevrolet]" /> <img src="graemlins/gr_guns.gif" border="0" alt="[guns]" />

 

Have you torqued the crank bolt to spec? That's the only way to do it IMO. I have a very long torque wrench. After doing a crank pulley I need a long break. <img src="gr_stretch.gif" border="0">

 

If you don't have a 250 ft-lb torque wrench, 42 ft-lbs and then 3/4 turn is supposed to give you 240 ft-lbs, I believe.