Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

guesses on power on 382 stroker setup

Thread Tools
 
Search this Thread
 
Old Dec 1, 2006 | 11:44 PM
  #1  
dougs2000ta's Avatar
Thread Starter
Teching In
 
Joined: Jun 2006
Posts: 24
Likes: 0
Question guesses on power on 382 stroker setup

I'm having a 382 put into my 2k t/a within the next couple weeks and i was wondering if anyone has close to the same setup as me or can guess what my rwhp/rwtq is going to be? the setup is as follows:

382 stroker shortblock with eagle 4.0" crank, eagle rods, mahle -21.4 pistons.
tsp prc stage 2.5 5.3l heads. 40,000 cometic head gasket supposed 9.5.1 C/R.
ls6 oil pump,all bolt ons, ls6 intake, all hooker exhaust, moser 12 bolt 3.73 gear.,comp 224/224 .563 112lsa custom cam.

Now with a good tune any guesses??
Reply
Old Dec 2, 2006 | 01:32 AM
  #2  
DONAIMIAN's Avatar
TECH Senior Member
iTrader: (18)
 
Joined: Jun 2002
Posts: 10,036
Likes: 0
From: NW Houston, TX
Default

I say around 450/450(assuming M6). That motor has no compression and no cam.
Reply
Old Dec 2, 2006 | 07:19 AM
  #3  
TAQuickness's Avatar
TECH Junkie
iTrader: (28)
 
Joined: Jan 2004
Posts: 3,250
Likes: 1
From: Houston
Default

I dunno. low compression, small cam, 12 bolt, I think 450/450 is optimistic.
Reply
Old Dec 2, 2006 | 07:51 AM
  #4  
Michael02hawk's Avatar
TECH Fanatic
iTrader: (26)
 
Joined: Feb 2005
Posts: 1,155
Likes: 1
From: Rochester, NY
Default

Originally Posted by dougs2000ta
I'm having a 382 put into my 2k t/a within the next couple weeks and i was wondering if anyone has close to the same setup as me or can guess what my rwhp/rwtq is going to be? the setup is as follows:

382 stroker shortblock with eagle 4.0" crank, eagle rods, mahle -21.4 pistons.
tsp prc stage 2.5 5.3l heads. 40,000 cometic head gasket supposed 9.5.1 C/R.
ls6 oil pump,all bolt ons, ls6 intake, all hooker exhaust, moser 12 bolt 3.73 gear.,comp 224/224 .563 112lsa custom cam.

Now with a good tune any guesses??
You'll basically be running my setup!
...execpt im running the TR224 114lsa, stock gm 10-bolt(3:73's).

See my sig & web-site.
tho my number should be higher now, I've added a few more bolt-ons since & havnt re-dynoed it yet.

Last edited by Michael02hawk; Dec 2, 2006 at 07:57 AM.
Reply




All times are GMT -5. The time now is 07:43 PM.