Anyone have Ls6heads and solid roller cam?
Thread Starter
Launching!
Joined: Nov 2001
Posts: 275
Likes: 0
From: CA
Anyone have Ls6heads and solid roller cam? I want to run this setup on my stock ls1 through a m6. How do you think it will run? I am wondering if I can get about 450rwhp out of this combo. Any suggestions?
Thanks
Jasen
Thanks
Jasen
On The Tree
Joined: Dec 2001
Posts: 176
Likes: 0
From: Newtown, PA
Re: Anyone have Ls6heads and solid roller cam? I have this combo and will be picking my car up next week. It is in the process of getting done right now.
Cartek has a great LS6 conbo that nets some serious power. They hadn't run it on an F-body before but they got great results on C5's.
Preliminary dynos have netted me some serious HP, but I don't want to post the results until they are done tuning my car. Once I pick it up next week, I will let you all know the exact HP that I am putting down. I am running this combo through a 12 bolt rear and 4.11 gears so that robs me of about 15-18 RWHP but none the less, I am getting great numbers.
I would definitely recommend this setup from them so far. It sounds badass. The cam they matched up my heads with is a 224/224 113 cam. It sounds really nice at idle and at WOT.
Dan
Cartek has a great LS6 conbo that nets some serious power. They hadn't run it on an F-body before but they got great results on C5's.
Preliminary dynos have netted me some serious HP, but I don't want to post the results until they are done tuning my car. Once I pick it up next week, I will let you all know the exact HP that I am putting down. I am running this combo through a 12 bolt rear and 4.11 gears so that robs me of about 15-18 RWHP but none the less, I am getting great numbers.
I would definitely recommend this setup from them so far. It sounds badass. The cam they matched up my heads with is a 224/224 113 cam. It sounds really nice at idle and at WOT.
Dan
