TR 224 112 cam swap complete
Thread Starter
TECH Junkie
Joined: Dec 2001
Posts: 3,242
Likes: 0
From: Lakeland, FL
TR 224 112 cam swap complete I just got done with the install which really wasn't that bad, I have alot of cuts and sore muscles though. Damn was it worth it though, this thing is a monster now, I'm so happy. I will have to drill out the throttle body cause it stalls sometimes when its cold but oh well. I also installed the 160 thermostat, ngk's, an underdrive pulley, and hpp3 programming while I was at it,, the programming is not giving me any pinging so I assume its ok at least until I can get to the dyno. Anyways just had to write about this cause I'm excited.
On The Tree
Joined: Nov 2001
Posts: 122
Likes: 0
From: Itasca, IL
Re: TR 224 112 cam swap complete congrats----
I'm having the same prob, this morning it didn't want to start at ALL!!!
go small on the TB drilling, like a 64th at a time, and make sure you don't get any filings in the engine!!!
I'm having the same prob, this morning it didn't want to start at ALL!!!
go small on the TB drilling, like a 64th at a time, and make sure you don't get any filings in the engine!!!
