Post your dyno charts here!!!
Re: Post your dyno charts here!!! Hey Everybody,
PLEASE make sure the dyno sheets say SAE corrected....
It really does make a difference. If you really want to show off, post the Correction factor.
Ryan Karasek
PLEASE make sure the dyno sheets say SAE corrected....
It really does make a difference. If you really want to show off, post the Correction factor.
Ryan Karasek
TECH Apprentice
Joined: Nov 2001
Posts: 336
Likes: 0
From: Aub, Fl
Re: Post your dyno charts here!!! Heres mine, '99 SS A4 bone stock except for a Whisper lid!
http://community.webshots.com/photo/...4294KWpTwtDsob
[ February 04, 2002: Message edited by: LS1JAY ]</p>
http://community.webshots.com/photo/...4294KWpTwtDsob
[ February 04, 2002: Message edited by: LS1JAY ]</p>
Thread Starter
TECH Senior Member
Joined: Nov 2001
Posts: 8,423
Likes: 0
From: Friendswood,TX
Re: Post your dyno charts here!!! Can everyone that has a chart pic on here make it a link? It takes awhile to load up for dial up people. Thanks. <img src="gr_grin.gif" border="0">
Re: Post your dyno charts here!!! you asked for it!
C5 with MTI B1 only, before and after cam
thats a C5 before and after a B1 cam
other motor mods are an Ls6 intake and a RMNSX air intake, adn a Z06 exhaust.
now for the SS...
Thats after Hooker catback, Lid, Grotts, and Hotcam kit. The 3 lines are me tuning the car with the MAFT. Shows you what tuning the car can do.
no other change than the LS6 intake and some more MAFT messing around, which still liked 6% lean.
Thats after I added a pulley and a MMS ported throttle body.
Thats after adding stage 3 ARE heads, but losing the tuning.
Plots of the car with 4.10s, and then with open headers, adn then with LS1Edit tuning, all to come.
\chris
C5 with MTI B1 only, before and after cam
thats a C5 before and after a B1 cam
other motor mods are an Ls6 intake and a RMNSX air intake, adn a Z06 exhaust.
now for the SS...
Thats after Hooker catback, Lid, Grotts, and Hotcam kit. The 3 lines are me tuning the car with the MAFT. Shows you what tuning the car can do.
no other change than the LS6 intake and some more MAFT messing around, which still liked 6% lean.
Thats after I added a pulley and a MMS ported throttle body.
Thats after adding stage 3 ARE heads, but losing the tuning.
Plots of the car with 4.10s, and then with open headers, adn then with LS1Edit tuning, all to come.
\chris
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Re: Post your dyno charts here!!! I guess the web server that the heads dyno is on isnt working... no biggie. Ill get that up in a bit and then change it to the right place.
\chris
\chris
