Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

oil pressure

Thread Tools
 
Search this Thread
 
Old 02-08-2002, 10:06 AM
  #1  
Teching In
Thread Starter
 
ScWhite 02 Z's Avatar
 
Join Date: Feb 2002
Location: waller, tx.
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Default oil pressure

what do you think my car will run , these cars don't have all that good
of
oil pressure cruising its at 40 psi idle is about 25 to 30 psi im used
to
seeing my trucks oil pressure is that good are not?
Old 02-08-2002, 10:21 AM
  #2  
D(irecto)r Pepper
 
Raughammer's Avatar
 
Join Date: Nov 2001
Location: Houston Raceway Park...in TEXAS.
Posts: 1,952
Likes: 0
Received 0 Likes on 0 Posts
Default Re: oil pressure

Hi Scott. What your car will run i have no idea.
stock Z's at HRP can vary from 13.0 to 13.9 and worse.

Ya never know until you go to the track.

You are welcome to use my nittos when we go saturday. (unless you want a baseline of a bone stock Z)

I also have a lid and K and N you can use.

Any way you can snag a cut out before tomorrow?
Or you can drop the muffler tonight... it comes right off and the cats will muffle the sounds to more than legal levels.

Oil Pressure? that sounds abotu right.... but it has been a good while since i looked at a stock oil pressure in the pepper I dont really remember exactly what it was. This MTI oil pump I use keeps the oil pressure VERY high. (60ish)

Welcome to the board Scott.
Congrats on your new Z28!
Old 02-08-2002, 10:50 AM
  #3  
Teching In
Thread Starter
 
ScWhite 02 Z's Avatar
 
Join Date: Feb 2002
Location: waller, tx.
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Default Re: oil pressure

thanks i cant wait to get to the track <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" /> <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" />
Old 02-08-2002, 10:54 AM
  #4  
Teching In
Thread Starter
 
ScWhite 02 Z's Avatar
 
Join Date: Feb 2002
Location: waller, tx.
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Default Re: oil pressure

hey john where do i get the cut out from ? <img src="images/icons/confused.gif" border="0">
Old 02-08-2002, 11:22 AM
  #5  
D(irecto)r Pepper
 
Raughammer's Avatar
 
Join Date: Nov 2001
Location: Houston Raceway Park...in TEXAS.
Posts: 1,952
Likes: 0
Received 0 Likes on 0 Posts
Default Re: oil pressure

Look at the sponsors on the right side of the page...see em?

MTI, Thunder, Tbyrne... etc. All of them can hook you up.

JC




All times are GMT -5. The time now is 12:05 AM.