Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

cam ?

Old Dec 31, 2006 | 09:13 AM
  #1  
calss's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Feb 2006
Posts: 11
Likes: 0
From: north carolina
Default cam ?

What would be a good cam for a camaro ls1 auto with headers and loudmouth 2
slp crank pulley ,ls6 intake, slp throttle body, but I have a ls6 cam and valvesprings, and 7.425 pushrods and a good tune
Reply
Old Dec 31, 2006 | 09:27 AM
  #2  
Patrick G's Avatar
LS1 Tech Administrator
20 Year Member
Photogenic
iTrader: (14)
 
Joined: Nov 2001
Posts: 8,246
Likes: 34
From: Victoria, TX
Default

https://ls1tech.com/forums/generation-iii-internal-engine/327734-cam-guide.html

Tons of information in there.
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.

Reply
Old Dec 31, 2006 | 09:51 AM
  #3  
DaddySS's Avatar
TECH Addict
 
Joined: Dec 2001
Posts: 2,907
Likes: 1
From: Bergen County, NJ
Default

Start by figuring out where you want to be, how do you plan to use the car, how much time and money do you want to invest, etc.

The link that Patrick points to should get you the basics and enough information to start asking and answering the right questions.
Reply
Old Dec 31, 2006 | 09:57 AM
  #4  
calss's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Feb 2006
Posts: 11
Likes: 0
From: north carolina
Default

I would like to be at 400 hp and i do not drive it all the time i drive it about once
a month
Reply
Old Dec 31, 2006 | 12:34 PM
  #5  
PREDATOR-Z's Avatar
TECH Senior Member
 
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
Default

Unless you do something to the heads 400rwhp auto is not that easy. But H/C it can be done with a fairly medium sized cam.
Reply
Old Dec 31, 2006 | 02:09 PM
  #6  
calss's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Feb 2006
Posts: 11
Likes: 0
From: north carolina
Default

so you think 228/230 112 lsa
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:33 AM.