i have a 238 242 605/610 lift 113 lsa xer lobe cam with ls6 heads milled 0.020 with stock headgaskets about what size pushrods would i need.

 

anyone

 

G'day there mate. I just put some Comp 7.40" pushrods into my LS1 (Comp 222/224@112lsa .566/.568 cam).

These quietened down the valve train considerably, when compared to the stock length pushrods.

I think most will advise you to get a pushrod length checker and determine the length using that.

Good luck with it,

Macca