Need help selecting a larger T/B
Thread Starter
TECH Enthusiast
Joined: Nov 2001
Posts: 534
Likes: 0
From: Sydney Australia
Need help selecting a larger T/B I’m looking for a larger throttle body for my fabricated manifold. PCD on the mounts are the same as LS1 and the hole size is 90mm
Can anyone recommend a particular brand and rough costings. What are the pros and cons if any?
Thanks
Peter
[ February 26, 2002: Message edited by: Plan B ]</p>
Can anyone recommend a particular brand and rough costings. What are the pros and cons if any?
Thanks
Peter
[ February 26, 2002: Message edited by: Plan B ]</p>
TECH Addict
Joined: Dec 2001
Posts: 2,340
Likes: 0
From: Fort Worth,TX
Re: Need help selecting a larger T/B I have a custom TB on my car and one of the cons is if you dont have computer tuning your car will surge just like a honda.The guy made it for himself a couple of years ago and like you he is a fabricater and he took a stock one and cut it all up and enlarged it somehow and jb welded it back together.The thing is massive along with my mass air meter.It is paper thin and the inlet is huge on the thing. <img src="gr_grin.gif" border="0">
Launching!
Joined: Jan 2002
Posts: 281
Likes: 0
From: Sydney Australia
Re: Need help selecting a larger T/B what about the starr 90mm tbs would the
wonder if accufab mustangs tbs would fit on your custom manifold
http://www.centralcoastmustang.com/accufab.htm
wonder if accufab mustangs tbs would fit on your custom manifold
http://www.centralcoastmustang.com/accufab.htm
