just curios to see your progress on it and see if you got it on the car. post pics if u do
thanks
Andre

 

Thanks for the interest. Good timing.

I just picked it up today from the machine shop, after having the two plates machined perfectly to fit the valley. I'm off to Earls tomorrow for the plumbing bits. I should have it all installed this weekend. I’ll let you know.

With my current set-up, I’m not expecting a lot. However I’m building a solid roller big bore, at the moment. All part of the big Plan. <img src="gr_stretch.gif" border="0">

Pete.

 

cool keep us posted w/ pics and track times.

i would love to be a tester car <img src="gr_stretch.gif" border="0"> <img src="gr_grin.gif" border="0">

 

Ya andre likes being cheap, won't pass up on keeping it on the low side LOL
<img src="gr_grin.gif" border="0"> <img src="gr_grin.gif" border="0"> <img src="gr_grin.gif" border="0"> <img src="gr_grin.gif" border="0">

JET