tuff

iTrader: (15)

Im thinking about throwing some restricted pushrods in my motor to slow down the upper end oiling and help out with the lower.Are these type of pushrods worth going to with a solid roller.The reason i ask is because of valve lash won't you bleed off between the lifter and the pushrod?To bad morel doe's not have a lifter that was restricted i think that would be a better way to go.

Inspector12

iTrader: (29)

I am running a set of Smith Bros. pushrods with a restrictor to do the same thing basicly and also since I am running a heavily ported oil pump to limit the amount of oil that goes into the valve covers and possibly into the intake or S/C now Turbos under boost and when it is pulling a lot of vacum at higher RPM's etc...