Does anyone have the xe-r 224 with..
Thread Starter
TECH Addict
Joined: Dec 2001
Posts: 2,340
Likes: 0
From: Fort Worth,TX
Does anyone have the xe-r 224 with.. Does anyone have this cam with milled heads?Mine are milled .030ths and I was looking into getting this cam for my beatr.I sold the C1 to a buddy of mine sense my car wasnt moving anyways(tranny)for what I paid for it.So I was going to get that one again or the C2 if it will fit.I am not sure about piston to valve clearance.
D(irecto)r Pepper
Joined: Nov 2001
Posts: 1,952
Likes: 0
From: Houston Raceway Park...in TEXAS.
Re: Does anyone have the xe-r 224 with.. My heads have been milled significantly more than .30 thous. I have had no P/V problems with my C2 cam/milled heads valves touching the pistons.s. Not even when spinning it close to 7000 RPM's.
You should be fine.
You should be fine.
Re: Does anyone have the xe-r 224 with.. </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by ONYXSS:
<strong>I believe Ragtop99 is running that combo with no problems.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">True, but I also have valve reliefs in my pistons. You never know when you might want more lift. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
<strong>I believe Ragtop99 is running that combo with no problems.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">True, but I also have valve reliefs in my pistons. You never know when you might want more lift. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
