where to find a guide for installing rods/pistons/crank??
Thread Starter
12 Second Club
iTrader: (16)
Joined: Jul 2005
Posts: 783
Likes: 0
From: central coast, cali
where to find a guide for installing rods/pistons/crank?? I know that there is a ls1howto.com site, but they show you how to do the simple bolt-ons and such. Im looking for a site that shows you a guide to installing the bottom end. I understand that there are certain torque specs when installing the rod bolts on the connecting rods and main bolts and other aspects of the bottom end.... can anybody guide me to where i can find this information??
Originally Posted by brad8266
GM Service manual
Thats enigine builder know how. You have to either read a book or go to school for it. Contact a few sponsors on here and see if they'll help you out or buy a book on engine building. You can look for online guides but that info usually isn't free.
It needs to be done right and shouldn't be done by an amateur from an online guide. You also dont have the tools, if you had the tools you'd have the know how. Clearances, knowing tolerances and application. It cost money to go to school to become a competent builder, or years of experience as an apprentice in a shop.
