Valve clearance
Thread Starter
On The Tree
iTrader: (24)
Joined: Jan 2004
Posts: 102
Likes: 0
From: Spring Hill TN USA
Valve clearance I thought I'd try this in another forum to see if I could get more feedback.
Comp Cams 238/240 - .605/.609 on 112
2000 LS1 Heads milled 0.010" with stock valves
Has anyone run a similar combination? Any clearance issues?
Comp Cams 238/240 - .605/.609 on 112
2000 LS1 Heads milled 0.010" with stock valves
Has anyone run a similar combination? Any clearance issues?