224/224 .581 .581 112lsa
Trending Topics
Originally Posted by JoeyGC5
In my Vette with he original Patriot heads I made 428rwhp using an LS6 manifold and freeeee flowing exhaust.
Those heads must have flowed well too, thats crazy for that cam. LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Take your stock #'s and add +-75whp with a M6........ my car with a lid and catback did 311whp and 326wtq with stock gears which was "low" compared to what I was seeing on the boards. Then after all the bolt ons in the sig with the cam I had Allan @ FMS tune it and he got 388whp and 378wtq out of it with 3.90's in the 10bolt. Hope that helps.
Originally Posted by Trust
Those heads must have flowed well too, thats crazy for that cam.
I have that cam in my '98 C5, with heads it made 390RWHP on stock air filter, stock mufflers, stock air bridge, etc. Car needs retuned after full intake/exhaust, so I know it will be ~410 RWHP.
sweet....here are all the mods done to my car.....the cam listed, LS6 intake, yella terra rockers,comps hardend PRs, mac mids, random tech. power max exhaust, off road Y, SLP lid w/ K&N, ported TB, free mods(cut the box), MSD 8.5mm wires, and B&M ripper shifter....all of this just got recently tuned...so im wanderin how much hp ill b makin???
