PRC Stage 2 ls6 head and MS3????
PRC Stage 2 ls6 head and MS3???? i currently have a MS3 cam and im looking to buy a set of PRC heads for my car my question is if i buy the stage 2 ls6 heads will i have enough valve clearance or will i have to cut valve reliefs in the pistons?
no..... you'll need to flycut.
edit: I did find this about those heads and the ms3....
https://ls1tech.com/forums/showpost....7&postcount=15
Your best bet is to call and ask for that setup.
edit: I did find this about those heads and the ms3....
https://ls1tech.com/forums/showpost....7&postcount=15
Your best bet is to call and ask for that setup.
Last edited by mr2guru; Feb 18, 2007 at 11:35 PM.
The stg 2s won't clear but we can set the 5.3 heads up to clear or the stg 1s will clear with no problems.
Brian
Brian
__________________
01 NBM Z28- A4 w/3.23s, TSP Black Lid, Hooker Catback, Pacesetter Headers w/ORY, ASP Pulley, Ported Throttle Body, TSP Torq. v3(231/234) Camshaft, TCI 4400, PRC Stg 1 Heads
Texas Speed & Performance
www.texas-speed.com
(806) 866-0734
01 NBM Z28- A4 w/3.23s, TSP Black Lid, Hooker Catback, Pacesetter Headers w/ORY, ASP Pulley, Ported Throttle Body, TSP Torq. v3(231/234) Camshaft, TCI 4400, PRC Stg 1 Heads
Texas Speed & Performance
www.texas-speed.com
(806) 866-0734
