What is max preload on comp 850-16 lifters?
02-24-2007 | 11:00 PM
#1
Thread Starter
Joined: Feb 2005
Posts: 4,174
Likes: 0
From: Indiana boy
What is max preload on comp 850-16 lifters? I am getting the rockers on now and with the 7.400" PRs, I have roughly .150" preload and with the 7.350" PR's, I have around .080" to .100" preload.
What is to much?
I was thinking .060" to .080" is the norm. Am I right?
What is to much?
I was thinking .060" to .080" is the norm. Am I right?
02-25-2007 | 04:45 PM
#3
Originally Posted by JRracing
I am getting the rockers on now and with the 7.400" PRs, I have roughly .150" preload and with the 7.350" PR's, I have around .080" to .100" preload.
What is to much?
I was thinking .060" to .080" is the norm. Am I right?
What is to much?
I was thinking .060" to .080" is the norm. Am I right?
02-25-2007 | 06:01 PM
#4
Thread Starter
Joined: Feb 2005
Posts: 4,174
Likes: 0
From: Indiana boy
Originally Posted by JPH
7.350's look to be the best set up for you. most people shoot for .080-.110 preload. .150 preload is way to much, lifter failure may happen.
02-27-2007 | 12:11 AM
#7
Thread Starter
Joined: Feb 2005
Posts: 4,174
Likes: 0
From: Indiana boy
Cool. Thanks guys. Patrick recommended the 7.4 pr's and they seem to be putting well over .100". The 7.350's are staying in. I will be firing it up tomorrow night. I can't hardly wait. It's been 6 months since it's been running.
