Paging NINEBALL
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You seem to have an "in" with whats going on at MTI. Maybe you can help me out here. I Ordered a set of thier Stage 2 LS6 heads and an X1 cam back in may and dealt with a guy by the name of Patrick. Once a week I would call in for a progress report of how everything was coming and talk to Patric about any new dyno numbers that were coming in with this combo. Well I went on a 2 week vacation and didnt call them during this time. Well I called in today because they should have been done and ready to ship by this last weekend. Well I found out Patric is no longer with MTI and the guy that I talked to went to check on my heads and said that they didnt even have my name on the board (guessing thats a list of whos stuff is done or being built). Kind of makes me worry a little bit. Think I could get you to make a call for me or talk to someone there to get this figured out? I am supposed to call them back here in an hour and see if they have "found" my heads.
Wasnt sure where to post this but it has to do with heads so I put it here. Sorry for any inconvieniences.
<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Wasnt sure where to post this but it has to do with heads so I put it here. Sorry for any inconvieniences.
<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
#4
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hey there Onyx (my HT alter ego!)Yes I did put a deposit down when I first ordered the heads. I had to because I got the LS6 heads. I called them back later and they said the head porters are about a week behind schedule. I just got a little nervous when he said that they didnt have my name on the "Board".
#5
LS1Tech Co-Founder
iTrader: (38)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'd only deal with Jayson for this particular situation. You can explain the deal with him, and he knows how to contact Patrick if needed.
JaysonMTI@aol.com
-Tony
JaysonMTI@aol.com
-Tony
#6
LS1Tech Sponsor
iTrader: (10)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Geoff,
I've talked to Jayson about your setup and everything is in order, But be asured the situation is being taken care of. I will be at the shop to make sure it is properly taken care of, MTI as well as I are sorry for any inconvience that you may have experienced.
Thanks,
Patrick
P.S good luck with your set up and i look foward to reading about your results.
I've talked to Jayson about your setup and everything is in order, But be asured the situation is being taken care of. I will be at the shop to make sure it is properly taken care of, MTI as well as I are sorry for any inconvience that you may have experienced.
Thanks,
Patrick
P.S good luck with your set up and i look foward to reading about your results.