Changing the lifters?
Thread Starter
11 Second Club
iTrader: (19)
Joined: May 2006
Posts: 965
Likes: 0
From: Whidbey Island, Wa.
I am going to probibly regret asking this, but.
I am doing a cam swap here in the near future. and I was wondering, I am thinking about going with either the MS3 OR 4. I am going to get the package and I have about 91000 on the car. Will it be safe doing this without swaping out the lifters. Or would it be a good idea to change them out, and is it possible to do so without taking the heads off?
Thanks
Lane
I am doing a cam swap here in the near future. and I was wondering, I am thinking about going with either the MS3 OR 4. I am going to get the package and I have about 91000 on the car. Will it be safe doing this without swaping out the lifters. Or would it be a good idea to change them out, and is it possible to do so without taking the heads off?
Thanks
Lane
Thread Starter
11 Second Club
iTrader: (19)
Joined: May 2006
Posts: 965
Likes: 0
From: Whidbey Island, Wa.
Originally Posted by brad8266
No need to swap lifters, the stock ones work just fine. If you do choose to replace them anyway you will have to pull the heads off.
Thread Starter
11 Second Club
iTrader: (19)
Joined: May 2006
Posts: 965
Likes: 0
From: Whidbey Island, Wa.
I have no plans in near future to take the heads off. Not until I purchase my new ones that is. Then I will replace them, That I do know. I was just wondering if I could get away with it for the time being.
Lane
Lane

