from MS3 back to stock
03-06-2007, 04:59 PM
#1
Teching In
Thread Starter
Join Date: Jul 2006
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
from MS3 back to stock Hello everyone! I have an MS3 cam with dual valve springs and 36lb injectors. I would like to put back my stock cam in the motor and my questions is -
can I use the dual valve spring and 36lb injectors with the stock cam?
The rest of the mods are LG pros, K&N FIPK, hardened stock length pushrods and a harmonic balancer.
I know I'm going to have to retune.
can I use the dual valve spring and 36lb injectors with the stock cam?
The rest of the mods are LG pros, K&N FIPK, hardened stock length pushrods and a harmonic balancer.
I know I'm going to have to retune.
03-06-2007, 05:14 PM
#2
Originally Posted by bay_Z
Hello everyone! I have an MS3 cam with dual valve springs and 36lb injectors. I would like to put back my stock cam in the motor and my questions is -
can I use the dual valve spring and 36lb injectors with the stock cam?
The rest of the mods are LG pros, K&N FIPK, hardened stock length pushrods and a harmonic balancer.
I know I'm going to have to retune.
can I use the dual valve spring and 36lb injectors with the stock cam?
The rest of the mods are LG pros, K&N FIPK, hardened stock length pushrods and a harmonic balancer.
I know I'm going to have to retune.
